Wheel Cleaner and Iron Remover

Wheel Cleaner and Iron Remover

How To: Deep Clean Wheels & Remove Iron Contamination

Brake dust isn't just dirt, it’s tiny particles of iron that can "bake" into your wheels and paint. Bar’s Bugs Wheel Cleaner + Iron Remover is a powerful, fast-acting formula that dissolves these particles on contact. The built-in colour-change technology turns from red to purple, showing you exactly when the iron has been captured and is ready to be washed away.


Why use Wheel Cleaner + Iron Remover?

  • Dissolves Brake Dust: Effectively breaks down stubborn iron contamination that standard soaps can't dissolve. 

  • Visual Indicator: The formula turns purple once the reaction is complete, taking the guesswork out of cleaning.

  • Surface Safe: Specifically designed to be safe on most wheels and painted surfaces.


DIRECTIONS FOR USE

1. Prep & Rinse
Work on one wheel at a time to ensure the product doesn't dry. Start by rinsing the wheel thoroughly with a pressure washer.

2. Spray Liberally
Spray the Wheel Cleaner liberally over the entire wheel surface.

3. The Colour Change
Wait up to 5 minutes. You will see the product begin to change color to a deep purple as it reacts with the iron particles. Important: Do not let the cleaner dry on the wheel at any stage.

4. Agitate (If Required)
For very dirty or neglected wheels, use a wheel brush to agitate the product and help break loose heavy build-up.

5. Final Pressure Rinse
Rinse the wheel thoroughly with a pressure washer to reveal a clean, decontaminated finish.


Pro Tips for Best Results

  • Pressure is Best: This formula works most effectively when rinsed off with a high-pressure washer.

  • Wheel Compatibility: While safe for most wheels, this product is not suitable for raw or polished aluminum, as it may cause staining or hazing.

  • Test First: If you are unsure of your wheel finish, always test a small, inconspicuous area for compatibility before full application.

  • Cool Wheels Only: Always ensure your wheels and brakes are cool to the touch before spraying to prevent the product from drying too quickly.

Other Guides

Glass Care Starter Kit

Glass Care Starter Kit

How To: Use the Glass Care Starter Kit The Bar’s Bugs Glass Care Starter Kit is your all-in-one solution for...
Anti-Fog

Anti-Fog

How To: Stop Interior Fog & Steam There is nothing more frustrating (or dangerous) than a fogged-up windscreen on a...
Bug & Tar Remover

Bug & Tar Remover

How To: Remove Bugs & Tar Safely Road grime, baked-on bugs, and sticky tar don’t just look bad, they can...
Headlight Restorer Kit

Headlight Restorer Kit

How To: Restore Your Headlights Cloudy or yellowed headlights aren't just an eyesore, they're a safety hazard and a common...
Tyre Shine

Tyre Shine

How To: Get Deep, Wet-Look Shine Nothing finishes off a car wash like high-gloss, deep black tyres. The Bar’s Bugs...
Glass Cleaner

Glass Cleaner

How To: Heavy Duty Glass Cleaning When standard cleaners won't cut it, reach for the "Heavy Duty." Formulated with our...
Glass Cleaner with Rain Repellent

Glass Cleaner with Rain Repellent

How To: Clean & Repel in One Easy Step Why just clean your glass when you can protect it at...
Glass Wipes

Glass Wipes

How To: Instant Clear Vision on the Go Don’t let a dirty windscreen ruin your drive. Bar’s Bugs Glass Wipes...